Showing posts with label brooks. Show all posts
Showing posts with label brooks. Show all posts

Wednesday, 23 March 2011

Caring for a Brooks Leather saddle with Proofide

If you have recently bought a bike with a genuine Brooks leather saddle (or any other leather saddle for that matter) you need to know about treating it for a long life.

I personally recommend the Brooks product called Proofide which is pretty cheap and does a good job.  It's basically just Tallow, and you may find alternatives out there that do the same thing.  This is not just a leather polish or cream, its an animal based treatment to deeply feed leather to proof it and stop it drying out and cracking.


To apply proofide, get a clean, lint free cloth and follow my instructions below (these are for a NEW saddle)

1. For a brand new saddle - remove it from the stem of the bike and bring it in the house - it will be easier as the first coat will be rather heavy.  Using a finger underneath the cloth, apply a thin-ish coating to the outer of the seat paying particular attention to the edges, the breathing holes and around the Brooks badge.  The final finish should look shiny and almost wet.

2. Turn the saddle over and apply a LIBERAL coating of proofide to any exposed leather under the saddle. This is not essential but will not do the seat any harm.  You may find areas that you cannot reach, but do your best - this coating is to protect the unfinished leather from rain spray.

3. Leave the saddle overnight to dry, refit to the bike, and buff off the outer of the seat (you need not worry about proofide applied under the seat unless it is likely to drop off or get on your clothes).  You need to polish the outer away until there is no greasy-ness on the saddle.

4. The best advice is to repeat this outer treatment after one week, then after one month, then after two months.  Thereafter, think about an application before the onset of each winter or if your saddle is looking dry.

Monday, 10 January 2011

Brooks leather grips - a review

Its been a few weeks now since I fitted the Brooks leather grips to my Pashley - sadly we have had nothing but bad weather which has curtailed many planned road trips.  Happy to now report that I have put these grips through their paces.




The first thing I would say is that I think these grips look the absolute business - they are formed out of a row of leather discs held together via spokes that run through them, and capped at each end with very classy looking aluminium ends.  The aluminium is stamped "Brooks", and there is also a leather end label with the Brooks logo too.

They come in a range of colours, but as my Pashley is in black, I went for black grips (though they look more grey)

After removing the nasty stock plastic grips that come on the Pashley, fitting is as simple as sliding them on and tightening both aluminium end caps with an allen key.  These grips are longer than the standard grips, so I did need to move my brake levers along a little, and in the case of the left hand grip, move the bell too.  No biggie though.

So what are they like in use?  Well they are large and substantial, that is the first thing I noticed - you really feel you are gripping the bike.  On my first rides with them, I must say they felt a little rough, but having now used them lots, the leather is smoothing out and conforming to my hands  They feel just great.

The real bonus (in the weather we are currently having) is that without gloves on these things get nice and warm - they are actually a joy to hold in cold weather!

I really cant complain, think they look great and feel great.  Well done Brooks

Sunday, 28 November 2010

Brooks Leather grips

Oh Boy, look whats just arrived in the post!

These are my black grips, and my wife has a brown pair.

These will be fitted to the Pashleys tomorrow, and I might then get around to a proper review!

These grips are just beautiful, machined alloy ends, connected with spokes that thread through a set of leather washers.  Warm, comfortable, breathable.  Cant wait.



Monday, 22 November 2010

The Beauty of Brooks

One of the nicest things about Pashleys (aside from their handbuilt frames) is their choice to use Brooks for saddles.

Brooks are a handmade leather saddle maker from Smethwick in the West Midlands, UK and they make such beautiful things.  They started in 1866

My roadster will be coming with this saddle, which is the Brooks B33 - I mean, just look at it!


After breaking in this thing will be supremely comfortable and with care and attention it will last a lifetime.  Pretty good huh?

The sad thing is (as far as my wallet goes) is that Brooks dont only make saddles - you see I now want to kit the Pashley out with brooks accessories too!